Character, Proportional Spacing - SATO CX400 Programming Reference Manual

Character, Proportional Spacing

Command Structure
Command Function
Printer Input
Printer Output
Special Notes
Page 2-18
<ESC>PS Set to proportional spacing
Example: See above
Placement: Preceding the data to be proportional spaced
Default: <ESC>PS
To specify the printing of proportional or fixed spacing for proportionally
spaced fonts.
<ESC>A
<ESC>H0025<ESC>V0050<ESC>PS
<ESC>L0202<ESC>XMPROPORTIONAL SPACING
<ESC>H0025<ESC>V0130<ESC>PR
<ESC>L0202<ESC>XMFIXED SPACING
<ESC>Q1<ESC>Z
1. Once this command is sent in the data stream, it is in effect until the
end of the print job unless an <ESC>PR Fixed Spacing command is
sent.
PN 9001106 Rev. A
Section 2: Command Codes
SATO CX400