›
Remove the headlight in the direction of arrow
Replacing the light bulb
›
Press the latch on the connector in the direction of arrow
›
Remove the key in the direction of the arrow
›
Pull the lamp holder until it stops in the arrow direction
›
Remove the lamp holder in the direction of the arrow
›
Insert the new bulb into the headlight and turn counter to the direction of
arrow
as far as the stop.
6
›
Fit the connector.
Refitting the headlight and grille
›
Replace the fog light by inserting it in the opposite direction of the arrow
» Fig. 241
and tighten.
›
Replace the cover and press in gently.
The cover must engage securely.
Replacing the bulb for the licence plate light
Fig. 242 Remove the number plate light/replace the bulb
Read and observe
and
›
Open the boot lid.
›
Push in the lamp in the direction of the arrow
The lamp comes loose.
›
Swivel out the lamp in the direction of the arrow
›
Remove the faulty bulb from the holder in the direction of the arrow
›
Insert a new bulb into the holder.
1)
The position of the opening may vary depending on the vehicle model.
230
Do-it-yourself
.
3
.
4
.
5
.
6
.
7
on page 227 first.
» Fig.
242.
1
and remove it.
2
›
Reinsert the lamp in the opposite direction to the arrow
›
Push on the light until the spring clicks into place.
Check that the light is securely inserted.
Rear Light
3
Fig. 243 Remove light / pull out connector
Read and observe
Removing
›
Open the boot lid.
›
Insert into opening
ers
» page
208, Vehicle tool kit .
›
Remove the cover by pulling the hook in the direction of arrow
›
Unscrew the screws
›
Grasp the light and carefully remove with shaky movements in the direction
of arrow
.
2
.
3
and
on page 227 first.
» Fig. 243
the clamps for removing the full wheel cov-
A
1)
with the key from the tool kit.
B
.
1
.
1