Stowing the roof rack
Fig. 126 Remove the side panels of the luggage compartment/stow the
roof rack
Read and observe
and
With vehicles have the variable loading floor, then the roof racks can be stow-
ed in the recesses of the luggage compartment side trim.
›
Fold the variable loading floor into the upper position
›
Remove the side covers of the luggage compartment in the direction of the
arrow
» Fig.
126.
1
›
Remove the key from the roof rack
The removed key can be stowed in recess
›
Insert the front roof rack
into the front recesses of the side trim.
A
›
Insert the rear roof rack
into the rear recesses of the side trim.
B
›
Replace the side trims of the luggage compartment in the opposite direction
of the arrow
.
1
›
Fold out the variable loading floor to the upper position
CAUTION
Before stowing the roof rack, pull out the key from the carrier, otherwise it
■
could be damaged.
If you want to stow the roof rack and the roll-up luggage compartment cover
■
at the same time, then it is necessary that the rear part of the roll-up luggage
compartment is covering the rear roof rack.
110
Using the system
on page 109 first.
» page
107.
»
.
.
C
» page
106.
Roof load
Read and observe
and
Do not exceed the permissible roof load of 75 kg, this includes the carrier sys-
tem.
The full permissible roof load cannot be used if a roof rack system with a lower
load carrying capacity is used. The maximum capacity of the carrier system
should never be exceeded.
on page 109 first.