Change bulb for fog light switch - Variant 1
Fig. 240 Remove the fog lamp / bulb change - Version 1
Read and observe
and
Remove the protective grille and headlight
›
Insert in opening
» Fig. 240
A
» page
208, Vehicle tool kit.
›
Loosen the protective grille by pulling the hook in the direction of arrow
›
Remove the protective grille in the direction of the arrow
›
Unscrew the screws
with the screwdriver from the tool kit.
B
›
With the key
» page
208, Vehicle tool kit unlock the locking
2
of arrow
.
3
›
Remove the headlight in the direction of arrow
Replacing the light bulb
›
Press the latch on the connector in the direction of arrow
›
Remove the key in the direction of the arrow
›
Pull the lamp holder until it stops in the arrow direction
›
Remove the lamp holder in the direction of the arrow
on page 227 first.
the clamps for removing the full wheel covers
.
2
.
4
.
5
.
6
.
7
.
8
›
Insert the new bulb into the headlight and turn counter to the direction of
arrow
as far as the stop.
7
›
Fit the connector.
Refit the headlight and grille
›
Replace the fog light by inserting it in the opposite direction of the arrow
» Fig. 240
and tighten.
›
Insert the protective grille and carefully press it in.
The protective grille must engage firmly.
Change bulb for fog light switch - Variant 2
.
1
in direction
C
Fig. 241 Remove the fog lamp / bulb change - Version 2
Read and observe
Remove cover and headlight
›
Insert in opening
» page
208, Vehicle tool kit.
›
Remove the cover by pulling the hook in the direction of arrow
›
Unscrew the screws
›
Remove the headlight in the direction of arrow
and
on page 227 first.
» Fig. 241
the clamps for removing the full wheel covers
A
with the screwdriver from the tool kit.
B
.
2
Fuses and light bulbs
4
.
1
229