Replacing the low beam bulb
Fig. 237 Headlight with halogen bulb: Bulb for low beam
Read and observe
and
›
Turn the protective cap
» Fig. 236
A
›
Disconnect the connector with the light bulb in the direction of arrow
» Fig.
237.
›
Remove the connector to the bulb in the direction of arrow
›
Remove the connector.
›
Insert the connector with the new bulb so that the fixing lug
fits the bulb into the recess on the reflector.
›
Remove the hook in the direction of arrow
›
Insert the protective cap
» Fig. 236
A
the direction of the arrow.
Change bulb for long-distance, daytime running lights and parking
light switch
228
Do-it-yourself
on page 227 first.
on page 227 in direction of the arrow.
.
2
A
.
3
on page 227 and turn it opposite to
Fig. 238
Bulbs for main beam, daytime
running lights, and parking light
Read and observe
›
Turn the protective cap
›
Pull the holder until it stops in the arrow direction
›
Remove the holder in the direction of the arrow
›
Insert the bulb holder with the new bulb and turn opposite to arrow direction
as far as the stop.
1
›
Insert the protective cap
opposite to the arrow.
Change bulb for additional parking light
1
» Fig. 237
Fig. 239 Headlights with Xenon light: Bulb for additional parking light
Read and observe
›
Turn the protective cap
›
Remove the bulb holder with the bulb by jiggling it out in the direction of the
arrow
» Fig.
1
›
Grasp the lamp socket at the places marked by arrows.
›
Remove the faulty bulb from the holder in the direction of the arrow
›
Insert a new bulb in the bulb holder up to the stop.
›
Replace the bulb holder in the headlamp with the bulb.
›
Insert the protective cap
opposite to the arrow.
and
on page 227 first.
» Fig. 236
on page 227 in direction of the arrow.
B
» Fig. 236
on page 227 and turn it in the direction
B
and
on page 227 first.
» Fig. 236
on page 227 in direction of the arrow.
B
239.
» Fig. 236
on page 227 and turn it in the direction
B
» Fig.
238.
1
.
2
.
2