Front Wheel/ Front Suspension; Preparation Data; Fault Diagnosis - Generic Trigger X 50ccm Owner's Manual

3 Front wheel/ front suspension

Preparation data

Fault diagnosis -------------------------3.2

Front wheel -------------------------3.3
Steering handle -------------------------3.4
Front fork -------------------------3.5
3.1 Preparation data
Matters needing attention in operation
Support the body bottom with a jack before disassembly so that the front wheel is suspended but couldn't
rotate.
Keep the brake pad free of grease in operation.
Reference for the entire motorcycle
Measuring position
front wheel spindle
front wheel
Torque value
Fixing bolt of steering lever
Front wheel spindle
3.2 Fault diagnosis
3.2.1 Actuation difficulty of steering lever
The Steering column nuts are over screwed.
The roller and bearing bracket of the steering column are severely worn out.
The steering column is badly distorted by collision.
The tyre pressure is too low.
-------------------------3.1
Item
bending
run-out
of rim
transverse
5-9
55-62 N·m
standard
value
(mm)
vertical
direction
Within 1.0
direction
N·m
- 40 -
Allowable limit(mm)
0.2
2.0
2.0
Tools
Bearing puller