Cdi Group; Ignition Coil - Generic Trigger X 50ccm Owner's Manual

6.4 CDI group

6.4.1 System inspection
System inspection.
Disassemble the CDI group and inspect the parts related
with the ignition system at the wire terminal.
6.4.2 Inspection
Disassemble the CDI group and inspect whether the joint is
loosen or eroded.
Inspection item
Main switch
Trigger
primary ignition coil
Secondary ignition coil

6.5 Ignition coil

6.5.1 Disassembly
Disassemble the body cover.
Disassemble the spark plug cover.
Disassemble the primary ignition coil.
Disassemble the ignition coil fixing bolts and unload the
ignition coil.
Installation is conducted in the reverse order of
disassembly.
*Note
The primary coil
accordance with the black/ white wire.
6.5.2 Inspect the primary coil
Measure the resistance between terminals of primary coil.
Standard value ：0.4Ω（+/-）10％（20 ）
If the resistance value is within standard value range, the
primary coil is good.
The resistance value "∞" stands for broken line in the coil，
so replace with a new product.
Testing terminal
black/white—black
black—
（spark plug not included
is installed in
red—red/white
red--Ground
spark plug cover
）
- 66 -
黑
black
蓝/白
blue/white
黑/白
Black/white
Standard value （20 ）
Conducted when main switch at "
OFF "
100-200Ω
0.4Ω（+/-）10％
4.5-5.5KΩ（+/-）10％
点火线图
Ignition line figure
Ω
红/黑
Red/black