Startup System; Preparation Data - Generic Trigger X 50ccm Owner's Manual

7 Startup system

Preparation data --------------------------7.1

Fault diagnosis ---------------------------7.2
Start electrical machinery ---------------7.3
Start relay ----------------------------------7.4
7.1 Preparation data
Matters needing attention in operation
Disassembly of the start electrical machinery may be conducted on the engine.
Please refer to disassembly operation in disassembly.
Preparation reference
Item
Brush length of startup motor
Liner of startup idler shaft
Outer diameter of startup idler
shaft
Torque value
Bolt in the clutch cover of the startup electrical machinery
Fixing nut in the clutch of the startup electrical machinery
Tools
Fixing nut spanner
Multiple-use fixing spanner
Standard value
12.5mm
- 69 -
Allowable limit
8.5mm
8.3mm
7.94mm
12 N·m
95 N·m