Generic Trigger X 50ccm Owner's Manual page 28

Front/rear suspension system
Front
Strain the front brake and compress the front shock
absorber up and down to check the actuation.
Check whether the front shock absorber is leak and each
part is loosen.
Rear
Compress the rear shock absorber up and down to check the
actuation.
Check whether each part of the rear shock absorber is
damaged or loosened.
Suspense the rear wheel and swing it to check whether the
engine suspension bush is loosened.
Nut/bolt/fixture
Check whether the bolt, nut and fixture of the motorcycle is
loosened.
If so, please tighten to specified torque force value.
Rim/tyre
Check whether there is crack, nail or other damage of the
tyre.
Check the tire pressure.
*Attention
The tire pressure should be measured under
cold condition.
Compress up
and down
Actuation inspection up and down
Rear shock absorption
bolt for fixing axle
- 27 -