Generic Trigger X 50ccm Owner's Manual page 45

Tools：
Fixing spanner of steering lever
Fixing nut spanner
*Note：
•Clean the opening part of the body guard board with rags.
Specification of the front shock absorber
Length：862.5mm
Angle：64°
Compression stroke：200mm
3.5.3 Installation
Tools:
Fixing nut spanner
Rotate the front fork left and right to confirm there is no
loosening.
Steps：
Install the steering handle.
Install the front shock absorber.
Install the front wheel.
upper
connecting
board
bearing
fixing bolt of
steering column
- 44 -
weld assembly
of instrument
support
lower
connecting
board
front shock
absorber
fixing bolt
shock absorber
guard