Generic Trigger X 50ccm Owner's Manual page 6

Maintenance regulation
As maintaining this vehicle, the instrument of metric system should be applied as possible for the reason that the
application of incorrect instrument may demage this vehicle.
Before dismantling from the frame cover of vehicle to maintain the dirt of parts or external subassembly should be
purged in order to prevent that falling into engine, chasis or braking system.
After dismantling and before measuring attrition value, please
clean parts and purge it with compressor.
error
error
error
The operation should not be bended or distorted; otherwise it
will cause operational difficulties or demage ahead of time.
The rubber parts will be deteriorated due to aging which is
prone to be damaged by solvent or oil and it should be inspected
(if necessary, it should be replaced) before reinstallation.
cover
Loosen the parts with multiple assemblies that should be made
from outside to inside and started from small one.
The complicated assembly, transmission case, for instance,
should be stored according to proper assembly sequence in order
to facilitate the assembly in the future.
- 5 -