Wheel Bearings; Adjusting The Chain Tension; Shock Absorber - Generic TR 125 User Manual

Checking the wheel bearings
The front and rear wheel bearings
must be checked at the intervals
nance and lubrication chart.
CAUTION
hub or if the wheel does not turn
smoothly have a dealer check the

wheel bearings.

Chain adjusting
35 - 40 mm
WARNING
!
parts within the secondary power
38
transmission and rear wheel
bearings) will be subjected to
unnecessary stress resulting in
- early wear and even chain
breakage. Too much slack in the
chain jumping off the chain wheels.
block the rear wheel or damage the
is likely to lose control of the
motorcycle.
Adjust the chain Tension
2
3
1. Loosen collar nut (1)
CHECKING/ MAINTAINING
2. Loosen counter nuts (2)
3. Turn right and left adjusting
4. Tighten counter nuts (2).
verify that the chain adjusters are
sitting close to the adjusting screws
and that the rear wheel has been
aligned with the front wheel.Tighten

Shock absorber

with a preload adjuster. The shock
tely variable. This allows the shock
absorber to be adapted to match
your body weight and the payload.
1
-
1