Generic Trigger X 50ccm Owner's Manual page 101

Housing set
Dismantling
internal gear gasket
center
wearing plate
iron friction plate
flat gasket
fixing gasket
dish gasket
Locknut
bearing ball
inward release lever
outward release lever
adjustment bolt
clamp nut
pressure cover
pressure spring
Bolt and gasket
12.4.2 Inspection
gear shape
Inspect whether the housing groove of clutch is burred or
broken. If it's true, trim it with a rasper. And if it needs a great
deal of trimming, then it should be replaced.
Inspect whether the press plate and central gears are damaged.
If it's true, replacement is necessary.
centre
press plate
Measure the free length of the spring.
Allowable limit ：29.0mm。
free length
- 100 -