Shift Chamber - Generic Trigger X 50ccm Owner's Manual

Inspect whether there are strange noises or loosening in
rotation of the crank shaft bearing.
If there is strange noises or loosening，replace the crankshaft
set.
Note：
Install the crankshaft connecting rod assembly on
the crankcase along with the gear change
mechanism.

13.3 Shift chamber

13.3.1Disassembly
Carry the shift shaft set.
Unload the shift fork shaft of the accessory shaft and the right
and left shift forks.
Unload the middle shift fork shaft and middle shift fork.
Unload the shift drum.
Unload the positioning set（located under the shift drum）.
Unload the main shaft set.
Unload the sub shaft set.
t
shift shaft set
middle fork shaft and shift fork
main shaft set
- 105 -
crank shaft bearing
sub fork shaft and shift fork
shift drum
sub shaft set