Toshiba e-studio556 Troubleshooting Manual page 25

1.TROUBLESHOOTING FOR THE HARDWARE
Remove the misfed paper.
15
Remove paper from the paper exit side of the finisher.
16
Close the upper cover of the finisher.
17
18 Return the paper feed tray of the Inserter to its original position.
19 When the Saddle Stitch Finisher and the Inserter are
installed together, open the front cover of the Inserter.
20 Open the guide plate of the saddle stitch unit.
21 Remove the misfed paper and close the transport
guide.
1 TROUBLESHOOTING FOR THE HARDWARE
1
Clearing a Paper Misfeed
2
23