Remote Wall Mounted Switch; Hand Held Remote Control - Vermont Castings 30ILDVNV Installation And Operating Instructions Manual

INSERT INSTALLATION

REMOTE WALL MOUNTED SWITCH

A remote wall switch and up to fifteen (15) feet of 18 Ga.
wire may be used with this appliance. Attach the wall
switch in a junction box at the desired location on the wall.
Figure 14.
NOTE: Extended lengths of wire may cause the fireplace
not to function properly. Longer length of wire is permitted
if the wire is made out of larger gauge (diameter) wire.
Always check with local code.
Sparker
Thermocouple
Piezo Igniter
PILOT
Millivolt
Valve
Figure 14 -
Wiring Diagram for Wall Switch

HAND HELD REMOTE CONTROL

The remote control receiver may be installed in the control
panel by removing the ON/OFF switch and the knock-out
plate. Slide the receiver into the space where the knock-out
plate was removed. Refer to remote instructions for wiring
and operation.
20306755
Thermopile
Pilot Assembly
Switch
HI
TH
TP
TH/TP
FP1933
wall switch wiring
ON OFF
Figure 15 -
Remote Receiver
30ILDV Series Gas Fireplace Insert
Optional 15'
Wall Switch
ON
OFF
Optional
Remote Control
ON
OFF
Remote
Receiver
FP2177
FP2177
remote receiver
17