Firebox Cleaning - Vermont Castings 30ILDVNV Installation And Operating Instructions Manual

30ILDV Series Gas Fireplace Insert

FIREBOX CLEANING

WARNING
• Allow logs to cool completely before cleaning. Logs
reach high temperatures.
• Make sure clearances to combustibles leave enough
room for maintenance and service.
• Carefully reassemble and reseal insert properly after
any cleaning or servicing.
1. Carefully remove log set, and embers from combustion
chamber.
2. Vacuum burner compartment thoroughly.
3. Vacuum any dust off logs.
4. Remove any lint from main burner and pilot.
5. Carefully replace log set, and embers in their correct
positions. Refer to Pages 19 - 21.
6. Replace door.
7. Relight pilot. Refer to Page 22.
8. Turn on main burners.
30
CLEANING and MAINTENANCE
20306755