Final Installation; Safety Barrier Installation - Vermont Castings 30ILDVNV Installation And Operating Instructions Manual

Ildv series direct vent gas fireplace insert

Hide thumbs

Table Of Contents

Table of Contents

30ILDV Series Gas Fireplace Insert

SAFETY BARRIER INSTALLATION

AFETY

NOTE: A barrier designed to reduce the risk of burns from

the hot viewing glass is provided with this appliance and

shall be installed for the protection of children and other

at risk individuals. If the barrier becomes damaged, the

barrier shall be replaced with the manufacturer's barrier

for this appliance.* Any safety screen, guard, or barrier

removed for servicing the appliance must be replaced

prior to operating the appliance.

* See parts list for model number.

1. Remove screen from packaging.

2. Align the four tabs on the sides of the screen frame

(two top, two bottom) with the corresponding slots on

the firebox. Figure 29

3. Slide the screen down into the slots until it fits se-

curely in place.

NOTICE: It is the responsibility of the installer to ensure

the barrier is affixed to the fireplace at the time of instal-

lation.

Figure 29 -

Barrier Screen Installation

CERTIFIED

ARRIER

DANGER

A barrier designed to reduce the risk of burns from

the hot viewing glass is provided with this

appliance and shall be installed.

DANGER

WARNING: The safety screen barrier

must be installed after the glass front is

in place. It is NOT a replacement for the

glass and the unit must NOT be operat-

ed without the glass in place.

Slot

Une barrière visant à réduire le risque de brûlure

par le hublot chaude est fournie avec cet

appareil et doit être installé.

Barrier Screen Tabs

(2 per side)