Product Features Product Specifications; Gas Pressures; Gas Specifications; High Elevations - Vermont Castings 30ILDVNV Installation And Operating Instructions Manual

PRODUCT FEATURES
PRODUCT SPECIFICATIONS
•
This appliance has been certified for use with either
natural or propane gas. Refer to the appropriate data
plates.
•
This appliance is not for use with solid fuels.
•
The appliance is approved for bedroom or bedsitting
room installations.
•
The appliance must be installed in accordance with local
codes if any. If none exist use the current installation
code. ANSI Z223.1/NFPA 54 in the USA, CSA B149 in
Canada.
•
This appliance is mobile home approved.
•
The appliance must be properly connected to a venting
system.
•
The appliance is not approved for closet or recessed
installations.
Figure 1 -
ILDV Series Fireplace Insert
20306755
30ILDV Series Gas Fireplace Insert

GAS PRESSURES

Inlet Minimum
Inlet Maximum
Manifold Pressure
GAS SPECIFICATIONS & ORIFICE SIZE
Fuel
Model
30ILDVNV Nat.
30ILDVPV LP

HIGH ELEVATIONS

Input ratings are shown in BTU per hour and are certified
without deration for elevations up to 4,500 feet (1,370 m)
above sea level.
For elevations above 4,500 feet (1,370 m) in USA,
installation must be in accordance with the current
ANSI Z223.1/NFPA 54 and/or local codes having juris-
diction.
In Canada, please consult provincial and/or local authori-
ties having jurisdiction for installation at elevations above
4,500 feet (1,370 m).
NOTE: The ILDV Series fireplace
inserts work without any electrical
supply. The blower must be attached
Blower
to 110/120V AC.
Gas Shut-
Off Valve
Blower Knob
ON/OFF
Switch
OFF/Pilot/ON
Knob
HI/LO Knob
Piezo
Natural Gas
Propane (LP)
4.5" w.c. 11.0" w.c.
10.5" w.c. 13.0" w.c.
3.5" w.c. 10.0" w.c.
Max.
Min.
Input
Input Orifice
BTU/h
BTU/h
30,000 20,500
30,000 23,000
size
#37
#51
5