Vermont Castings 30ILDVNV Installation And Operating Instructions Manual page 20

30ILDV Series Gas Fireplace Insert
3. Align the two pin holes on Log #6 onto the burner. Figure
18
Figure 18 -
Place Log #6
LG537
ILDV log 6
4. Place log #1 by aligning the holes to the burner pin.
9/08
Figure 19
Figure 19 -
Place Log #1
LG538
ILDV log #1
5. Position log #2 so that it is resting on log #1. Figure 20
9/08
Figure 20 -
Place Log #2
LG539
ILDV log #2
9/08
20
Log #6
Log #1
Log #2
6. Position log #3 so that the bottom right end is resting
on the pad on log #2 and the left end is resting on the
flat spot on log #1. Figure 21
Log #3
Figure 21 -
Place Log #3
LG540
ILDV log #3
7. Align log #4 hole to the burner pin and rest on log #1.
9/08
Figure 22
Log #4
Figure 22 -
Place Log #4
8. Align the cutout on the bottom of log #5 and fit it into
log #4. Figure 23
Log #5
Figure 23 -
Place Log #5
INSERT INSTALLATION
LG541
ILDV log #4
9/08
LG542
ILDV log #5
9/08
20306755