Table of Contents
Advertisement
UVL18
Fig. 8 Positioning logs on grate assembly.
Fireplace Screen
The fireplace screen must be in place when the
appliance is operating, and unless other provisions
for combustion air are made, the screen must have
openings for the introduction of combustion air.
5. Remote wall switch
(RN and RP models only)
1. Thread wire through the electrical knockout
located on either side of the fireplace. Do not cut the
wire or insulation on metal edges. Ensure that the
wire is protected. Run the other end to a conve-
niently-located wall receptacle box.
2. Attach the wire to the switch and install the switch
into the receptacle box. Attach the cover plate to the
switch.
3. Connect the wiring to the gas valve. One wire
connects to the 'TP/TH' terminal; the other attaches
to the 'TH' terminal. (Fig. 10)
NOTE: If any of the original wire as supplied with the
appliance must be replaced, it must be replaced with
a wire of at least a 105° (C) temperature rating.
UVL Series
UVL24
LG112
LG113
To Wall Switch
Piezo Ignitor
Fig. 9 Connecting a wall switch to the valve terminals.
(UVL-R Series only)
UVL30
LG114
Control Knob
Hi/Lo Knob
751
11
Hide quick links:
Advertisement
Table of Contents
