Error Messages - Brother 09055CDN Service Manual

3.2

Error Messages

The error messages displayed on the LCD of the machine and their description are shown in
the table below.
Error message
Access Error
Calibrate
(Calibrate Failed)
Cartridge Error
Condensation
Connection Error
Connection Fail
Cooling Down
Cover is Open
DIMM Error
Disconnected
Document Jam
Drum Error
Drum Stop
Duplex Disabled
Description
The USB device is taken out while data is
being processed.
Incorrect density sensor measurement
value when implementing adjustment of
color density.
Density patch measurement is not
completed normally when implementing
adjustment of color density.
Toner of the color which is being used
reaches the end of life when implementing
adjustment of color density.
Failure to detect a new black toner
cartridge.
Failure to detect a new yellow toner
cartridge.
Failure to detect a new magenta toner
cartridge.
Failure to detect a new cyan toner
cartridge.
Condensation occurred on the laser unit.
FAX communication error.
Cooling down the inside of the machine to
protect it.
The front cover is open.
The fuser cover is open.
Defective DIMM is installed.
FAX connection error.
The document was not inserted, or fed
properly.
Dirt on drum unit.
Drum unit error. (An drum error occurred
after the drum unit reached the end of life.)
The back cover is open upon duplex
printing. (The back cover sensor is OFF.)
2-24
Error Refer
codes to:
--- 2-140
81 2-65
82 2-65
87 2-68
C0 2-86
C1 2-86
C2 2-86
C3 2-86
1A 2-36
--- 2-140
75 2-60
A1 2-77
56 2-51
C9 2-89
--- 2-138
A2, 2-77
A3 2-78
7D 2-61
83 2-66
0F 2-32
16 2-34
Confidential