Rewriting The Firmware Using Computer - Brother 09055CDN Service Manual

1.1.2

Rewriting the firmware using computer

Note:
- It is recommendable to rewrite 1) Panel firmware, 2) Sub firmware and 3) Main firmware
in this order.
- DO NOT unplug the power cord of the machine or your computer or disconnect the USB
cable while rewriting the program files.
<Procedures>
(1) Turn the power switch of the machine off. Turn on the power as pressing the 5 button.
Check that "
(2) Connect the computer to the machine with the USB cable.
(3) Double-click the "FILEDG32.EXE" to start. The following screen appears. Select the
"Brother Maintenance USB Printer."
(4) Drag and drop a program file that you want to rewrite (for instance, LZXXXX_$.upd) onto
the Brother Maintenance USB Printer icon in the screen shown above.
Note:
After rewriting Panel firmware, Sub firmware or Main firmware is completed, the
machine returns to the ready state. To continue rewriting the other program files, turn
off the power switch of the machine, and turn it on again as pressing the 5 buttons.
Check that "
(5) Upon completion of rewriting, the machine restarts and returns to the ready state
automatically.
(6) Disconnect the USB cable from the machine.
" appears on the LCD.
" appears on the LCD and start rewriting.
4-3
Confidential