Error Indications; Error Codes - Brother 09055CDN Service Manual

Color laser mfc
Table of Contents

Advertisement

3.

ERROR INDICATIONS

This machine includes a self-diagnosis function. If the machine does not work normally it
judges that an error has occurred, and indicates the corresponding error message on the LCD,
which in turn helps the service men to quickly find out the problem.
3.1

Error Codes

The errors with a mesh background in the table below do not occur in the normal operation.
They might occur due to noise around the installation site, change of the power supply
voltage, and failures in the software.
Error
Problem
codes
0B
Touch panel no response error.
0E
Touch panel failure upon
start-up of the machine.
0F
The back cover is open upon
duplex printing. (The back cover
sensor is OFF.)
10
Inter-color position alignment
adjustment failure. (Error, which
cannot be recorded, occurs.)
11
Inter-color position alignment
adjustment failure. (Toner of the
color which is being used
reached the end of life.)
12
Inter-color position alignment
adjustment failure. (Incorrect
measurement value of
inter-color position alignment
adjustment.)
16
Paper of unsupported size for
duplex printing or paper of
different sizes is loaded.
17
The paper tray 1 is not installed
before printing. (The cassette of
the T1 paper edge sensor is
open.)
18
The paper tray 2 is not installed
before printing. (The cassette of
the T2 paper edge sensor is
open.)
19
The drum unit reached the end
of life.
Refer
Error
to:
codes
2-32
1A
Condensation occurred on the
laser unit.
2-32
1B
Cyan drum error.
(An error occurred after the
counter value exceeded the
value more than twice as long as
2-32
the life of the drum.) (Printing is
not available until the drum unit
is replaced.)
2-33
1C
Magenta drum error.
(An error occurred after the
counter value exceeded the
2-33
value more than twice as long as
the life of the drum.) (Printing is
not available until the drum unit
is replaced.)
2-34
1D
Yellow drum error.
(An error occurred after the
counter value exceeded the
value more than twice as long as
the life of the drum.) (Printing is
2-34
not available until the drum unit
is replaced.)
2-35
1E
The drum unit will reach the end
of life soon.
1F
More than the specified number
of the option trays is installed.
2-35
20
Black laser diode error (K).
21
Yellow laser diode error (Y).
2-36
22
Magenta laser diode error (M).
23
Cyan laser diode error (C).
2-17
Problem
Confidential
Refer
to:
2-36
2-37
2-37
2-37
2-37
2-37
2-38
2-38
2-38
2-38

Advertisement

Table of Contents
loading

Table of Contents