Context-Sensitive Menus In The Display Area In The Radar And Chart Radar Modes - Furuno FCR-21x9-BB Operator's Manual

1. OPERATIONAL OVERVIEW
1.11.2 Context-sensitive menus in the display area in the radar and
chart radar modes
Right-click anywhere in the display area in the radar and chart radar modes to show
the context-sensitive menu.
Radar mode, map ON
Radar mode, map OFF or chart ON
Radar mode map ON area selected
1-24
Target Data/ACQ/ACT: For cursor-selected TT or
AIS target, display target data, acquire target for TT,
or activate sleeping AIS target.
Target Cancel: Cancel tracking on selected tracked
target (erase target), sleep activated AIS target.
Off Center: Off center the display.
EBL Offset: Offset EBL1, EBL2 (to measure range
and bearing between two targets).
Zoom Set: Select zoom area.
Area Select: Specify the area where to delete, copy
marks.
Mark Delete: Delete cursor-selected mark. Greyed
out when radar map is off.
Mark Copy: Copy cursor-selected mark. Greyed out
when radar map is off.
Own Ship Offset: Apply an offset to own ship
position.
REF Mark: Make cursor-selected target a reference
target (for use in TT). Greyed out unless TT is active.
Cursor Size: Select cursor size, large or small.
Notes Detail: Show details about cursor-selected
Notes.
MOB Delete: Delete selected MOB mark.
Area selected
This context-sensitive menu is available when an
area is created to cancel tracking on specific targets,
or delete or copy marks.
Area Target Cancel: Cancel tracking on targets with-
in the area selected.
Area Mark Delete: Delete all marks within the area
selected.
Area Mark Copy: Copy all marks within the area se-
lected.
Area Cancel: Cancel the area created.