Resetting Partial Operation Control; Changing The Total Counter Value; Clearing The Black Ratio Data; Checking/Clearing Copy Counts By Paper Sizes - Kyocera KM-3035 Service Manual

2FD/2FF/2FG
Maintenance
item No.
U906

Resetting partial operation control

Description
Resets the service call code for partial operation control.
Purpose
To be reset after partial operation is performed due to problems in the drawers or other sections, and the
related parts are serviced.
Method
1. Press the start key.
2. Press EXECUTE on the touch panel. It is displayed in reverse.
3. Press the start key to reset partial operation control. The maintenance mode is exited, and the machine
returns to the same status as when the main switch is turned on.
U908

Changing the total counter value

Description
Displays the total counter value.
Purpose
To check the total counter value.
Method
Press the start key.
Setting
1. Select the count to be changed.
2. Enter a six-digit value using the numeric keys.
3. Press the start key. The value is set. The screen for selecting a maintenance item No. is displayed.
Completion
To exit this maintenance item without changing the current total counter value, press the stop/clear key. The
screen for selecting a maintenance item No. is displayed.
U910

Clearing the black ratio data

Description
Clears the accumulated black ratio data for A4 sheets.
Purpose
To clear data as required at times such as during maintenance service.
Method
1. Press the start key.
2. Press CANCEL on the touch panel.
3. Press the start key. The accumulated black ratio data is cleared, and the screen for selecting a
maintenance item is displayed.
Completion
To exit this maintenance item without changing the current setting, press the stop/clear key. The screen for
selecting a maintenance item is displayed.
U911

Checking/clearing copy counts by paper sizes

Description
Displays and clears the paper feed counts by paper sizes.
Purpose
To check or clear the counts after replacing consumable parts.
Method
Press the start key. The screen for the paper feed counts by paper size is displayed.
Clearing
1. Select the paper size. The selected item is displayed in reverse.
To clear all counts, press the reset key.
2. Press the start key. The count is cleared.
When clearing all counts, the screen for selecting a maintenance item is displayed.
Completion
To exit this maintenance item without changing the count, press the stop/clear key. The screen for selecting a
maintenance item is displayed.
1-4-68
Description