Kyocera KM-3035 Service Manual page 177

Section Jam code
Paper feed 10
section
11
12
13
14
15
16
17
18
19
20
21
Description
No paper feed from the
upper drawer
No paper feed from the
lower drawer
No paper feed from large
paper deck
No paper feed from pa-
per feeder upper drawer
No paper feed from pa-
per feeder lower drawer
No paper feed from by-
pass
Jam in large paper deck
horizontal paper convey-
ing section 1
Jam in large paper deck
horizontal paper convey-
ing section 2
Jam in large paper deck
horizontal paper convey-
ing section 3
Misfeed in copier vertical
paper conveying section
Misfeed in paper feed
desk vertical paper con-
veying section
Misfeed in bypass verti-
cal paper conveying sec-
tion
Multiple sheets in copier
paper feed section
Feed switch 1 (FSW1) does not turn on within 841 ms of the
upper paper feed clutch (PFCL-U) turning on; the clutch is
then successively turned off for 1 s and turned back on, but
the switch again fails to turn on within 841 ms.
Feed switch 2 (FSW2) does not turn on within 882 ms of the
lower paper feed clutch (PFCL-L) turning on; the clutch is
then successively turned off for 1 s and turned back on, but
the switch again fails to turn on within 882 ms.
Feed switch 3 (FSW3) does not turn on within 650 ms of pa-
per feed clutch 1 (PFCL1) turning on.
Feed switch 3 (FSW3) does not turn on within 880 ms of the
desk upper paper feed clutch (DPFCL-U) turning on; the
clutch is then successively held off for 1 s and turned back
on, but the switch again fails to turn on within 880 ms.
Desk feed switch (DFSW) does not turn on within 880 ms of
the desk lower paper feed clutch (DPFCL-L) turning on; the
clutch is then successively held off for 1 s and turned back
on, but the switch again fails to turn on within 880 ms.
The bypass feed switch (BYPFSW) does not turn on within
1730 ms of the bypass paper feed clutch (BYPPFCL) turning
on; the clutch is then successively held off for 1 s and turned
back on, but the switch again fails to turn on within 1730 ms.
Paper path sensor 3 (PPSENS3) does not turn on within 290
ms of the paper feed clutch 2 (PFCL2) turning on.
Paper path sensor 2 (PPSENS2) does not turn on within 310
ms of the paper path sensor 3 (PPSENS3) turning on.
Paper path sensor 1 (PPSENS1) does not turn on within 190
ms of the paper path sensor 2 (PPSENS2) turning on.
The registration switch (RSW) does not turn on within 936
ms of feed switch 1 (FSW1) turning on.
Feed switch 1 (FSW1) does not turn on within 1079 ms of
feed switch 2 (FSW2) turning on.
Feed switch 2 (FSW2) does not turn on within 1203 ms of
feed switch 3 (FSW3) turning on.
Feed switch 3 (FSW3) does not turn on within 888 ms of the
desk feed switch (DFSW) turning on.
The registration switch (RSW) does not turn on within 3932
ms of the bypass feed switch (BYPFSW) turning on.
Feed switch 1 (FSW1) does not turn off within the time re-
quired to convey the length of the used paper size plus 1123
ms of turning on.
Feed switch 2 (FSW2) does not turn off within the time re-
quired to convey the length of the used paper size plus 1123
ms of turning on.
2FD/2FF/2FG
Conditions
1-5-3