Table of Contents
Advertisement
8.
Upgrading Firmware Using IP Utility
You can upgrade the Firmware using the IP Utility software included in the software CD or from the
Website of EverFocus (click
1.
Save IP Utility Setup AutoRun.exe
the on-screen instructions. Check Run IPUtility.exe and click the Finish button, the IP Utility will
be launched to search the IP devices connected in the same LAN automatically.
2.
Log in the camera by checking the desired model and then click the Log in
dialog box appears.
3.
Type the Username and Password. Click the OK button, the Login status displays.
Note:
1.
The default user ID is user1 and the default password is 11111111.
2. If you select more than one camera that has the same user ID / password, you will be
able to log in several cameras at once.
3.
Up to 10 cameras can be simultaneously upgraded to the latest firmware. If you connect
the cameras to a PoE switch, please make sure the Power Consumption of the PoE switch
is sufficient.
here
to download).
in your computer. Double click the .exe file and follow
70
EZN3160/3260
icon. The Log in
Advertisement
Table of Contents
