4-9.Adjustment Software Initial Setup - FujiFilm FinePix S2 Pro Service Manual

FinePix S2 Pro (U/E) SERVICE MANUAL

4-9.Adjustment Software Initial Setup

* As the initial setup has already been written to the [FFW.ini]
file, all that is required is to follow the procedure below.
Note that changing the file name may prevent the soft-
ware running.
* As steps 3, 4, 5, and 6 of initial setup are incorporated in
the [FFW.ini] file, confirmation is the only action required.
* Do not change the content of the program S2Pro_UE.ff un-
der any circumstances. Any changes will prevent the soft-
ware running.
<Step 1>
Double-click on the adjustment software executable file
[FFW.exe] (Fig.D-(2)) to display the [FFW Start-up Screen]
(Fig.E).
<Step 2>
Select [Mode Settings] (Fig.F-(2)) from the [Setting] menu
(Fig.F-(1)) on the [MENU Screen].
<Step 3>
Select the [EVR & Communications] menu on the [Cus-
tomize] dialog screen (Fig.G-(1)).
Setup as follows on the [EVR] menu (Fig.G-(2)).
Item
etc (-V2)
LANC page
<Step 4>
Select the [Etc] menu on the [Customize] dialog screen
(Fig.H-(1)).
Setup as follows on the [Etc] menu (Fig.H-(2)).
Item
Auto-measure
Change mode
Use Japanese font
(2)
<Fig.H> Etc Customize Dialog Box Screen
Setup details
Use (=check)
Use (=check)
Setup details
0
Do not check (=not used)
Do not check (=not used)
(1)
Fx_F601_UED.ff
Apply
4. Adjustment
<Fig.E> FFW Start-up Screen
(1)
<Fig.F> Mode Setting Display Select Screen
(1)
(2)
<Fig.G> EVR Dialog Box Screen
S2Pro_UE.ff
(2)
Fx_F601_UED.ff
Fx_F601_UED.ff
Apply
35