4-2-6.Install The Dsc Jig Driver And The Pc Adjustment Software - FujiFilm FinePix4800Zoom Service Manual

FinePix4800Zoom(U/E/EG) SERVICE GUIDE
(2) Firmware decompression and preservation method
Please disregard the undermentioned content
(STEP3 from STEP1) until the download of the
firmware is instructed.
<step1>
Download compressed firmware (ZJ00482-100.ZIP*1) from
Web server (http://fujifilm-di.intranets.com/).
(*1)
ZJ00482-100 described here is a part number of
FinePix2300(U_E_EG).The part number is separately notified
when the download of the firmware is needed in
FinePix4800Zoom(U_E_EG).
<step2>
Defrost the downloaded compression software
<step3>
As the folder named ZJ00482-100 can be made by simply
defrosting;(Fig.D-3-(1)) All files are copied in Smart Media in
this folder including the folder named imfidx10(Fig.D-3-(2))
(Caution)[Important]
(a) Download should use Smart Media.
(b) Please format Smart Media with the camera.
(c) When the folder named imfidx10 is changed, the firmware cannot be downloaded.
4-2-6.Install the DSC jig driver and the PC adjustment
software.
* Since this camera uses the USB for communications with the
personal computer, in order to start the PC adjustment soft-
ware, [the DSC jig driver] needs to be installed in the personal
computer beforehand.
* The DSC jig driver is the same as that for the FinePix 6800Z,
so if this jig driver software is already installed in the personal
computer, it is not necessary to install it.
The procedure is given below.
(1)Installation of DSC jig driver
<step 1>
DSC jig driver(ZJ00476-100.ZIP) is downloaded from Web
server (http://fujifilm-di.intranets.com/).
<step 2>
Defrost the downloaded compression software
<step 3>
Double-click setup.exe in the folder of defrosted ZJ00476-
100 and install Fuji FILM DSC Jig Driver as follows.
<step 4>
Install the software in [C:\ProgramFiles\Fjig]
according to the instructions on the PC's screen.
(2)Startup of PC adjustment software
When the folder has been copied to the C drive, double-click
on the file C:\FinePix4800ZoomU_E\ffw217.exe (Fig.D-4(1)) to
start the adjustment software.
4. Adjustment and Inspection
My Computer
3.5inch FD(A:)
(C:)
ZJ00482-100
<Fig.D-3>
(1)
<Fig.D-4> ffw217.exe screen display (Windows Explorer)
imfidx10
(2)
(1)
17