FujiFilm FinePix S2 Pro Service Manual page 43

FinePix S2 Pro (U/E) SERVICE MANUAL
<Step 5>
Follow instructions on the [5.00V Input Screen (Fig.16)], and
adjust BATT_REF voltage. Set voltage to 5.00V(+0.01V,
-0.01V), press the [Enter] key on the computer.
---> Save the adjusted data to the flash ROM when adjust-
ment is completed normally.
---> The [Battery Adjustment Complete Screen (Fig.17)]
is displayed when the adjusted data is saved normally.
<Step 6>
Press the [Enter] key on the computer while in the
[Battery Voltage Adjustment Complete Screen (Fig.17)].
---> The [Adjustment Select Screen (Fig.4)] is displayed.
Always select [[F12]: End Setting] to complete adjustment.
4. Adjustment
<Fig.16> 5.00V Input Screen
<Fig.17> Battery Adjustment Complete Screen
43