Initial Settings Of The Adjustment Software - FujiFilm FinePix S3000 Service Manual

4.Adjustments

4.8 Initial Settings of the Adjustment Software

* The initial settings are already written in the "FFWJ.ini"
file, therefore perform the following procedure to the
letter. Note that, if you change file names, the software
will not start up.
* The initial settings of steps 3 - 6 are already set in the
"FFWJ.ini" file. Therefore, you need only to check them.
* Do not rewrite the user program (FXS3000W.ff).
If the pro- gram is rewritten, the adjustment software
will not start-up.
<Step 1>
Double-click on the "FFW.exe" execute file of the adjust-
ment software to open the "FFW Startup" screen (Fig. 1).
<Step 2>
Click on "Settings" (Fig. 1-(1)) in the menubar of the startup
window. Then, select "Mode setting" (Fig. 1-(2)) from the
pull-down menu that appears.
<Step 3>
Select the "EVR & Comm" tab (Fig. 2-(1)) in the "Custom-
ize" dialog box that appears.
Set the "EVR" items (Fig. 2-(2)) as follows.
Item Details
etc (-V2) Check
LANC page check Check
40
FinePix S3000 Service Manual
1 2
<Fig. 1>
2 1
<Fig. 2>