Composition Of Adjustment Software, And Creation Of Sd Card For Adjustment; Creating A Firmware Sd Card - FujiFilm FinePix S1800 Service Manual

Confidential: FUJIFILM Service Center Use Only
3. Adjustments

3-5-2. Composition of Adjustment Software, and Creation of SD Card for Adjustment

In order to perform adjustment, an SD card for each adjustment item must be created.
<Step 1>
Copy the "Batch" folder (Fig. 3-5-4) of the folder for each item to be adjusted, and specified files directly under the SD card,
following the instructions given for each item to be adjusted (Fig. 3-5-5).
* When a "Batch" folder already exists directly under SD card, delete this folder before copying.
* When it is not clear anymore which "Batch" folder is directly under SD card, redo the procedure starting with this step.
FX S1700_W
＜Fig.3-5-4＞

3-5-3. Creating a firmware SD card

In order to perform Firmware Download, it is necessary to create a firmware SD card.
<Step 1>
Downloadcompressed Firmware (ZJ01732-***.zip) from Web server (https://denhin. fujifilm.co.jp/csg_en/index.htm).
<Step 2>
Decompression the downloaded compression file (Fig. 3-5-6).
<Step 3>
Copy the "TBM_L145.BIN" file and the "HiddenMenu" folder, which are stored in the extracted "FxS1700 Firmware Ver.*.** "
folder, under SD card (Fig. 3-5-7).
* When a "Batch" folder already exists directly under SD card, delete this folder.
ZJ01732-***
FxS1700 Firmware Ver.***
TBM_L145.BIN
TBM_L145.BIN
3-6