Initial Settings Of The Adjustment Software - FujiFilm FinePix F30 Service Manual

4. Adjustments
4-6.

Initial Settings of the Adjustment Software

* The initial settings are already written in the "FFW.ini" file,
therefore perform the following procedure to the letter.
Note that, if you change file names, the software will not
start up.
* The initial settings of steps 3 to 6 are already set in the
"FFW.ini" file. Therefore, you need only to check them.
* Do not rewrite the user program (FxF30_W_0.ff). If the
program is rewritten, the adjustment software will not
startup.
<Step 1>
Double-click on the "FFW.exe" execute file of the adjustment
software to open the "FinePix F30_W Adjustment Software
Startup" screen (Fig. 4-6-1).
<Step 2>
Click on "Settings" ([1] in Fig. 4-6-2) in the menubar of the
startup window.
Then, select "Mode setting" ([2] in Fig. 4-6-2) from the pull-
down menu that appears.
52
FinePix F30 Service Manual
FinePix F30_W Adjustment Software Start-up Screen
Select [Start] from [Operate] on the FFW Toolbar
—> The adjustment software starts
<Fig. 4-6-1>
(1) (2)
FinePix F30_W Adjustment Software Start-up Screen
Select [Start] from [Operate] on the FFW Toolbar
—> The adjustment software starts
<Fig. 4-6-2>
FxF30_W_0.ff