Manually Setting The Dhcp Client Hardware Address; Clear Procedure - Avaya one-X 9610 Installation And Maintenance Manual

Manually Setting the DHCP Client Hardware Address

Use this procedure to manually set or change the DHCP Client Hardware Address, if you use
static addressing rather than DHCP.
1. When you select CHADDR from the Craft Local Procedure Screen, the following text
displays:
Current setting:
New Setting:
where, except for the 9610 which displays the actual value, the setting is the current system
value of NVCHADDR.
2. To change the setting, enter a valid client hardware address. This value is usually the MAC
address, which DHCP then converts to an integer preceded by zeroes.
3. Press Save to store the new setting and redisplay the Craft Local Procedure screen.

Clear Procedure

Sometimes, you might want to remove all administered values, user-specified data, and option
settings. Essentially, you want to return a telephone to its initial "clean slate" or out of the box
condition. This is usually done when passing a telephone to a new, dedicated user when the
LOGOFF option is not sufficient. For example, a new user is assigned the same extension, but
requires different permissions than the previous user.
The CLEAR option erases all administered data—static programming, file server and call server
programming, and user settings including Contact button labels and locally programmed
Feature button labels, and restores all such data to default values. The CLEAR option does not
affect the software load itself. If you have upgraded the telephone, the telephone retains the
latest software. Once you have cleared a telephone, you can administer it normally.
!
CAUTION:
This procedure erases all administered data, without any possibility of recovering
CAUTION:
the data.
Use the following procedure to clear the telephone of its administrative, user-assigned and
options values.
1. When you select CLEAR from the Craft Local Procedure Screen, the telephone displays the
prompt "Press Clear again to confirm."
Manually Setting the DHCP Client Hardware Address
Issue 8 March 2012 41