Logoff - Avaya one-X 9610 Installation And Maintenance Manual

Local Administrative Options
"Emergencies" when NVLOGSTAT = 1
●
"Alerts" when NVLOGSTAT = 2
●
"Critical" when NVLOGSTAT = 3
●
"Errors" when NVLOGSTAT = 4
●
"Warnings" when NVLOGSTAT = 5
●
"Notices" when NVLOGSTAT = 6
●
"Information" when NVLOGSTAT = 7
●
"Debug" when NVLOGSTAT = 8
●
2. To change the setting, press the Right (or Left) navigation arrow to cycle through the
settings.
Depending on the current value, the next sequential text string is selected and displayed as
the setting. For example, if the current value is Alerts (2), pressing the Right navigation
arrow changes the value to Critical (3). If the current value is Debug (8), pressing the Right
navigation arrow changes the value to Disabled (0).
3. Press Save to store the new setting and redisplay the Craft Local Procedure screen.

Logoff

Use the following procedure to log off a telephone.
Note:
If a user registered (logged in) via a USB device, this procedure is not applicable.
Note:
The only way to log off a telephone registered with a USB device is by removing
the device.
Note:
When updating local (Craft) procedures from a 9670G IP Telephone, touching the
Note:
line you want to change or the applicable softkey produces the same result as
selecting a line and pressing the applicable softkey on other 9600 Series IP
Telephones.
!
CAUTION:
Once a telephone is logged off, a password and extension might be needed to
CAUTION:
log back on.
1. When you select LOGOUT from the Craft Local Procedure Screen, the telephone displays
the following text:
Press Log Out again to confirm
46 9600 Series IP Telephones Release 3.0 Installation and Maintenance Guide