Table of Contents
Advertisement
MAINTAINING YOUR MACHINE
3
Remove the old photoconductor.
Roll up the green plates on the
old drum.
Hold the used drum by the plates
and carefully pull it out.
Caution: Do not expose the new drum to light for an extended period of
time. Do not touch the surface of the drum.
4
With the black protective sheet
still attached, fit the photoconduc-
tor into the two slots as shown.
One end of the photoconductor is
marked "R". This should be at the
front of the machine as shown.
5
Remove the black sheet.
Caution: Never touch the photo-
conductor (green drum).
6
Push down the two green levers
to lock the photoconductor in
place.
Caution: Never touch the photo-
conductor (green drum).
Replacing the Photoconductor Drum
95
Advertisement
Table of Contents
