Table of Contents
Advertisement
FAXING
Setting the Auto Ring Time
In Auto mode, the machine rings a number of times to give you the chance to
pick up the handset before taking the call automatically. You can alter the
number of rings by changing the Auto Ring Time.
1
Press the Function key and 6, 2,
2, 2, 2, 6, 1 using the ten key
pad, then press the Yes key.
N
2
Press the
display appears.
3
Press the Yes key. The factory
setting will be displayed, either:
Change the number of rings, press the
No key, then press the new number us-
ing the ten key pad.
Example 03. Press 0, 3 using the ten
key pad.
Keep these settings, go to step 4.
Note: If the Auto Ring Time is set
too high and the connecting ma-
chine times out, you will not be
able to receive fax message.
4
Press the Yes key, then the
Function key.
When you connect Telephone Answering Machine
When you are in Auto Mode, you can connect the Telephone Answering
Machine.
Plug the answering machine into the TEL jack on your fax machine.
Auto mode ensures that your answering machine has the chance to respond to
incoming telephone calls. If the call happens to be a fax message, the message
will be given to the fax machine automatically.
Receiving Calls & Fax Messages (Faxes/Phone Calls)
key until the opposite
6(7 2:1 180%(5
6(7 12 2) 5,1*6
12 2) 5,1*6
5,1*6
<1(;7
N
<1(;7
N
<1
29
Advertisement
Table of Contents
