Table of Contents
Advertisement
OTHER FEATURES
Communication Result Report (Memory Transmission) (Switch 03, bit 0)
This report is printed out after memory transmission showing whether it was
successful or not. If you have switched this report off, a Communication Failure
Report will be printed only when a communication fails.
The page column gives the number of successfully transmitted pages and the
total pages scanned e.g., 4/5 means 5 pages were scanned but only 4 were
sent.
Transmission Result Report (Switch 03, bit 5)
This report is printed out after immediate transmission showing whether it was
successful or not. The page column gives the number of pages that were
transmitted successfully.
Communication Result Report (Polling result report ) (Switch 03, bit 4)
This report is printed after your machine polls a message from another
machine.
Communication Failure Report (ON if Communication Result Report is OFF)
This report is printed if a memory transmission failure occurred, after a job is
completed. It is only printed if the Communication Result Report is switched
off, and event of a communication failure. The page column gives the number
of successfully transmitted pages and the total pages scanned e.g., 4/5 means
5 pages were scanned but only 4 were sent.
Error Report (Turned on/off by a Service Technician)
Th i s r e p o r t i s p r i n t e d a f te r each unsuccessful communication. The
communication failure report (above) is printed after a job has been completed.
So while doing a broadcast, the machine may print a number of error reports,
and at the end, it prints a communication failure or transmission result report.
The page column gives the total scanned pages scanned. The "PAGE NOT
SENT" or "PAGE NOT RECEIVED" column shows the number of pages that
could not be sent or received successfully. Check it, and retransmit any pages
that were not sent. If a particular problem continues or gets worse, keep the
error reports for the service technician.
Printing Part of the Image on the Report (Switch 04, bit 7)
For reference purposes, the machine prints the first few inches of the fax
message on the following reports.
Transmission Result Report
Memory Storage Report
Communication Failure Report
Verifying Communications, Errors, Counters, etc.
55
Advertisement
Table of Contents
