Table of Contents
Advertisement
Memory Transmission and Immediate Transmission
Sending a Message with the Exposure Glass
1
Remove any document left in the auto document feeder or on the
exposure glass.
2
The FAX indicator must be lit.
Press the Fax/ Copy key if it is
not lit.
Make sure that the machine is in
standby mode. The display
should look like this:
3
Lift up the top cover and place
the first page of your document
face down on the exposure glass,
as shown in the diagram. Then
lower the top cover.
Note: You can dial before you set
the document. Place the docu-
ment after you dial the number
and go to step 6.
4
If the memory indicator is not lit,
press the Memory key.
22
5($'<
',$/ )$; 180%(5
FAXING
Advertisement
Table of Contents
