Table of Contents
Advertisement
OTHER FEATURES
Setting the Timer (Function 71)
Caution:
While the night timer is active, all incoming calls are refused if the memory fills up.
Example: For Tuesday, set the Night Timer to switch the heater on at 9 am and
off at 6 pm.
1
Press Function, 6 and enter ac-
cess code 2 2 2 2. Then, press
7,1 and Yes.
2
Press Yes.
M
3
Use the
and
through the days of the week.
Example: Press
Tuesday.
4
Press Yes.
5
There are two timers for each day, each with an ON/OFF setting. "ON"
means that the heater will switch on at the time indicated. "OFF" means
that the heater will switch off at the time indicated. To change the ON to
OFF, or the other way round, press ∗ or #. When the ON/OFF display is
correct: Go to step 6.
N
6
Press
to move the cursor under
the time.
7
Input the time(9:00): Press 0, 9,
0, and 0 from the key pad.
N
keys to scroll
N
twice to go to
Saving Energy
6(7 1,*+7 7,0(5
6(7 7,0(5
681
6(7 7,0(5
78(
7,0(5 78(
21 )520
7,0(5 78( .3$'<
21 )520
7,0(5 78(
21 )520
<1
<1
M N
<1
M N
<
∗
<
∗
63
Advertisement
Table of Contents
