Table of Contents
Advertisement
Sending the Same Message to Many Destinations
6
Dial a fax number in one of the
following ways.
a) Ten Key Pad
*: This is the example of the case where Group Dial is programmed in 08 of the
Quick Dial key.
**: This is the example of the case where Quick Dial key 20 is programmed as
the Group key, and Group dial number 1 is programmed.
Programming the Quick Dial: see page 42.
Programming the Speed Dial: see page 42.
Programming the Group Dial: see page 44.
Programming the Group key: see page 46.
Note: The maximum destinations you can dial using the ten key pad is 49.
However, this limitation is up to the machine condition.
If you enter the wrong number,
press No or Clear and enter
again.
Clear to delete one digit.
No to delete the whole number.
7
Press Yes (not the Start key).
You'll get:
The number in the bottom right of
the display tells you which num-
ber is being currently dialed if you
specified more than one destina-
tion.
e.g. 2 means the second number
is being dialed.
8
Repeat steps 6 and 7 until all destinations are entered.
38
b) Quick Dial
Quick Dial 07
07
75$160,7
c) Speed Dial
75$160,7 ',$/67$57
',$/ )$; 180%(5
FAXING
<67$57
OOOOO
d) Group Dial
Example:
Method 1 *
08 of the Quick Dial
key.
Method 2 **
10 of the Quick Dial
key and 1 of the ten
key pad.
Advertisement
Table of Contents
