Table of Contents
Advertisement
Setting the Paper Size
Setting/Adding Paper in the Optional Paper Cassette
Remove all the pieces of tape attached to the cassette.
1
Remove the bypass feeder and
store it somewhere safe.
2
Fix the tray to the machine as
shown. Push it in until it gently
locks in place.
Note: Remove the small card-
board tab from the gear.
3
Lift the transparent cover until it
locks open. Make sure the paper
guides are pushed right out. Flex
the paper stack a few times. In-
sert the stack into the tray as
shown. The rear edges of the pa-
per should be touching the back
of the tray. Make sure the paper
guides are flush with the paper.
Slide them in if necessary.
Note: Remove all remaining pa-
per from the cassette before add-
ing more paper.
4
If the paper size indicator does
not match the paper size in the
tray, turn the dial until it shows
the correct size.
88
MAINTAINING YOUR MACHINE
cardboard tab
Advertisement
Table of Contents
