Table of Contents
Advertisement
FAXING
Memory Transmission
Sending a Message with the Auto Document Feeder
If at any time you want to completely start over, just remove the document, then
open and close the top cover.
Caution: If your document gets stuck while it is being processed, press the
Stop key, and turn to page 104 for instructions on how to safely
remove the original.
1
Remove any document left in the tray.
2
The FAX indicator must be lit.
Press the Fax/Copy key if it is
not lit.
Make sure that the machine is in
standby mode for faxing. The dis-
play should look like this:
If the display isn't as above,
press the Clear Modes key to
clear any previously programmed
destinations.
3
Fan your document stack (at
most 30 pages) to make sure all
pages are loose, then square it.
All pages in your document must
be one-sided and be of the same
size.
Memory Transmission and Immediate Transmission
5($'<
',$/ )$; 180%(5
19
Advertisement
Table of Contents
