Table of Contents
Advertisement
Machine Environment
Away from heaters and air conditioners, to avoid sudden changes of
temperature.
Within 5 meters of a three-pin grounded power outlet (220-240 Volts,
50/60 Hz).
Ensure there is clearance around the machine, as indicated in the dia-
gram below.
10cm
NOTE: This machine generates a certain amount of ozone. Although the
amount generated is within safety requirements, it is recommended that, to
avoid ozone buildup, you install the machine in a room which is properly
ventilated.
Operating Precautions
While the machine is in operation, do not turn off the main switch or un-
plug the power cord.
Keep corrosive liquids, such as acid, off the machine.
Do not allow paper clips, staples, or other small metallic objects to fall in-
side the machine.
The fusing unit may be very hot. Be careful when handling it.
First of all, remove all the pieces of tape attached with the machine.
Close all covers and replace the bypass feeder after that.
132
10cm
INSTALLATION
20cm
Advertisement
Table of Contents
