Web Service Settings - Device Admin - Customer Display - Epson TM-U220-i Technical Reference Manual

Web Service Settings - Device Admin - Customer Display

You can use this to set communication with the customer display and check its operation.
Item
Customer Display
Communica- Communications
tions settings speed (bps)
Data bit
Parity
Brightness settings
Test display
Apply
Communication speed and other items must be set for this product in order to control the cus-
tomer display as an RS232C-compliant serial communication device. Set these items to match
the communication conditions of the customer display connected to.
 There is no need to install a USB RS232 conversion driver.
 If you use the default settings unchanged, there will be no need to alter the communication
102
Set whether to use the Customer Display.
Set the communication speed.
Set the data bit length.
Set the parity.
Set the brightness of the customer display.
You can set 20%, 40%, 60%, or 100%. The maximum bright-ness is
100%.
Performs a test display to the customer display.
When SSL is enabled on this product, make sure that the
certificate issued by the signature source certification authority of
the SSL certificate imported to this product is registered in the
computer or device.
Saves settings to TM-U220-i.
settings.
Description