Manage The Wan Settings; View Or Change The Wan Settings - NETGEAR C6300BD User Manual

The following table describes the fields on the Internet Setup screen.
Field
Account Name (If Required)
Domain Name (If Required)
Internet IP Address
Get Dynamically from ISP
Use Static IP Address
Domain Name Server (DNS) Address
The DNS server is used to look up site addresses based on their names.
Get Dynamically from ISP
Use These DNS Servers
7. If you changed the settings, click the Apply button.
Your settings are saved.

Manage the WAN Settings

You can configure a DMZ (demilitarized zone) server, change the maximum transmit unit
(MTU) size, and enable the cable data gateway to respond to a ping on the WAN (Internet)
port.

View or Change the WAN Settings


To view or change the WAN settings:
1. On your computer, launch an Internet browser such as Mozilla Firefox or Microsoft
Internet Explorer.
2. In the address field of your browser, enter http://routerlogin.net.
You are prompted to enter a user name and password.
3. Type admin for the user name and type your password.
Manage Internet, WAN, and LAN Settings and Use the WPS Wizard
AC1900, N900, and N450 WiFi Cable Data Gateways
Description
Enter the account name provided by your cable service provider. This
name might also be called the host name. If you do not know or did not
receive an account name, leave the default name, which is the model
number of the cable data gateway.
Enter the domain name provided by your cable service provider. If you do
not know the domain name, leave this field blank.
Your cable service provider uses DHCP to assign your IP address. Your
cable service provider automatically assigns these addresses.
Enter the IP address, IP subnet mask, and gateway IP address that your
cable service provider assigned to you. The gateway is the provider
gateway to which your cable data gateway connects.
Your cable service provider uses DHCP to assign your DNS servers. Your
cable service provider automatically assigns this address.
If you know that your cable service provider does not automatically transmit
DNS addresses to the cable data gateway during login, select this option,
and enter the IP address of your cable service provider primary DNS
server. If secondary and tertiary DNS server addresses are available, enter
these also.
43