Back Panel Of The N450 Wifi Cable Data Gateway - NETGEAR C6300BD User Manual

AC1900, N900, and N450 WiFi Cable Data Gateways

Back Panel of the N450 WiFi Cable Data Gateway

The back panel contains ports, connectors, and a recessed button.
Figure 8. Back panel connections and button of the N450
The back panel includes the following components, viewed from top to bottom:
• Four 10/100/1000 Mbps Ethernet LAN ports. Use these ports to connect local computers
to the Ethernet LAN of the cable data gateway.
• USB port. A second USB 2.0 port lets you connect a USB hard drive or flash drive to the
cable data gateway. (The first USB 2.0 port is on the front panel.)
• Recessed Reset button. To set the gateway to the original factory settings, press and
hold the Reset button for at least seven seconds. For more information, see
WiFi Cable Data Gateway to Its Factory Default Settings
• Coaxial cable connector. Attach a coaxial cable to the cable service provider's
connection.
• Power input connector. Attach the power adapter cable to this input.
LAN ports
USB port
Reset button
Coaxial cable connector
Power adapter input
Hardware Overview
19
Return the
on page 94.