Rx Power
Serving SID
NID
Packet Zone ID
Frame Error Rate
Subnet Color
Code
AN-AAA
Packet Error Rate
MIP Error Code
Dual WAN Settings
This page is used to configure the broadband dual WAN Settings.
The default setting is to always use mobile broadband.
To specify broadband settings:
1. On a computer or wireless device that is connected to your gateway, launch a Web
browser.
2. In the address or URL field of your browser, type http://myrouter.
3. When prompted to log in, enter admin for the user name and type the password. (The
default password is password.)
Gateway Settings
Technical support staff may request this value from you.
The Serving System ID identifies your home network area and is used to
determine if you are 'home' or 'roaming'.
Technical support staff may request this value from you.
Technical support staff may request this value from you.
Used to determine the quality of a signal connection. Technical support
staff may request this value from you.
Technical support staff may request this value from you.
Technical support staff may request this value from you.
Technical support staff may request this value from you.
The Mobile IP Error Code. Technical support staff may request this
value from you.
69