AC1900, N900, and N450 WiFi Cable Data Gateways
For four minutes, the cable data gateway attempts to find the WiFi device (that is, the
client) that you want to join the cable data gateway's main WiFi network.
During this time, the WPS LED on the front panel of the cable data gateway blinks green.
10.
Within four minutes, go to the WiFi device and use its WPS software to join the network
without entering a password.
When the cable data gateway establishes a WPS connection, the LED lights solid green
and the Add WPS Client screen displays a confirmation message.
11.
To verify that the WiFi device is connected to the cable data gateway's main WiFi network,
select BASIC > Network Map.
The WiFi device displays onscreen.
Manage Internet, WAN, and LAN Settings and Use the WPS Wizard
57